본문 바로가기 주메뉴 바로가기

Product (제품소개)

PRODUCT

E4981A (커패시턴스미터)

주파수 범위 20 Hz to 1 kHz, 1 MHz
측정 스피드 2.3 ms
DC 바이어스 0.1 V to 1 V
정확도 0.07%
인터페이스 USB, LAN, GPIB

E4981A 커패시턴스 미터 주요 특징 및 사양

측정 시간

  • 고속 측정: 2.3ms(1MHz), 3.0ms(1kHz), 11.0ms(120Hz)

기본 정확도

  • 정확한 C-D 테스트: 0.07%, 0.0005

추가 특징

  • 9 빈 정렬
  • 256 멀티채널 보정
  • 4268A 및 4288A와 호환 가능한 SCPI 명령 및 핸들러/스캐너 인터페이스
  • 높은 값의 세라믹 캐패시터 테스트를 위한 일정한 테스트 레벨(자동 레벨 제어)


내용

E4981A 캐패시턴스 미터는 생산 라인에서 세라믹 캐패시터 테스트를 위한 고속의 신뢰할 수 있는 측정을 지원합니다. E4981A는 정확한 측정으로 작은 값에서 큰 값에 이르는 캐패시턴스 측정 기능을 실현했습니다. 테스트 처리율을 향상시키면서 세라믹 캐패시터 테스트를 위한 탁월한 구성요소 품질을 달성했습니다.

E4981A 커패시턴스 미터 주요 특징 및 사양

측정 시간

  • 고속 측정: 2.3ms(1MHz), 3.0ms(1kHz), 11.0ms(120Hz)

기본 정확도

  • 정확한 C-D 테스트: 0.07%, 0.0005

추가 특징

  • 9 빈 정렬
  • 256 멀티채널 보정
  • 4268A 및 4288A와 호환 가능한 SCPI 명령 및 핸들러/스캐너 인터페이스
  • 높은 값의 세라믹 캐패시터 테스트를 위한 일정한 테스트 레벨(자동 레벨 제어)


내용

E4981A 캐패시턴스 미터는 생산 라인에서 세라믹 캐패시터 테스트를 위한 고속의 신뢰할 수 있는 측정을 지원합니다. E4981A는 정확한 측정으로 작은 값에서 큰 값에 이르는 캐패시턴스 측정 기능을 실현했습니다. 테스트 처리율을 향상시키면서 세라믹 캐패시터 테스트를 위한 탁월한 구성요소 품질을 달성했습니다.


E4981A 커패시턴스 미터 옵션

 
E4981A-001 Frequency, 120 Hz/1 kHz/1 MHz
E4981A-002 Frequency, 120 Hz/1 kHz
E4981A-1A7 Calibration + Uncertainties + Guardbanding (Not Accredited)
E4981A-1CM Rack mount kit
E4981A-600 Delete front handle kit
E4981A-A6J ANSI Z540-1-1994 Calibration
E4981A-ABA Printed manual, English
E4981A-ABJ Japan - Japanese localization
E4981A-PLG Continental European power cord - ONLY FOR EU DISTR W MULT PWR CORD STANDARDS
16034E
테스트 픽스처 (SMD 부품) 
16034G
SMD 테스트 픽스처 
16034H
SMD 어레이 유형 LCR 테스트 픽스처 

SMD 어레이 유형 LCR 테스트 픽스처

16034H
The Keysight 16034H is designed for impedance evaluations of array-type SMD.
16047A
Test Fixture (Axial and Radial) 

Test Fixture (Axial and Radial)

16047A
The 16047A is designed for impedance evaluation of axial/radial lead type devices.
16047E
테스트 픽스처 

테스트 픽스처

16047E
16047E는 리드 타입 디바이스의 임피던스 평가를 위해 설계되었습니다.
16048A
Test Lead, BNC Connector to BNC Connector Board 

Test Lead, BNC Connector to BNC Connector Board

16048A
The 16048A test leads extend the measurement port with a 4 terminal-pair configuration.
16048D
2m BNC Test Cable 

2m BNC Test Cable

16048D
The 16048D test leads extend the measurement port with a 4-Terminal Pair configuration.
16065A
200 Vdc External Voltage Bias Fixture 

200 Vdc External Voltage Bias Fixture

16065A
The 16065A test fixture makes it possible to measure a DUT with up to +/-200V DC BIAS.
16089A
Large Kelvin Clip Lead 

Large Kelvin Clip Lead

16089A
The Keysight 16089A makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16089B
Medium Kelvin Clip Lead 

Medium Kelvin Clip Lead

16089B
The Keysight 16089B makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16089C
Kelvin IC Clip Lead 

Kelvin IC Clip Lead

16089C
The Keysight 16089C makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16092A
스프링 클립  픽스처 

스프링 클립 픽스처

16092A
The Keysight 16092A test fixure is designed for impedance evaluation of both lead and SMD components.
16192A
병렬 전극 SMD 테스트 픽스처 

병렬 전극 SMD 테스트 픽스처

16192A
The 16192A test fixure is designed for impedance evaluations of side electrode SMD components.
16194A
고온 부품 테스트 픽스처 

고온 부품 테스트 픽스처

16194A
The 16194A is designed for measuring both axial/radial leaded devices
16196A
병렬 전극 SMD 테스트 픽스처, DC~3GHz 

병렬 전극 SMD 테스트 픽스처, DC~3GHz

16196A
동축 구조로 개발된 16196A SMD 테스트 픽스처는 최대 3GHz 의 RF 임피던스 측정을 수행합니다.
16196B
병렬 전극 SMD 테스트 픽스처, DC~3GHz 

병렬 전극 SMD 테스트 픽스처, DC~3GHz

16196B
동축 구조로 개발된 16196B SMD 테스트 픽스처는 최대 3GHz 의 RF 임피던스 측정을 수행합니다.
16196C
병렬 전극 SMD 테스트 픽스처, DC~3GHz 

병렬 전극 SMD 테스트 픽스처, DC~3GHz

16196C
동축 구조로 개발된 16196C SMD 테스트 픽스처는 최대 3GHz 의 RF 임피던스 측정을 수행합니다.
16196D
병렬 전극 SMD 테스트 픽스처, DC~ 3GHz 

병렬 전극 SMD 테스트 픽스처, DC~ 3GHz

16196D
동축 구조로 개발된 16196D SMD 테스트 픽스처는 최대 3GHz 의 RF 임피던스 측정을 수행합니다.
16197A
바닥 전극 SMD 테스트 픽스쳐  

바닥 전극 SMD 테스트 픽스쳐

16197A
키사이트 16197A는 바닥 전극 SMD의 임피던스를 평가하도록 설계되었습니다.
16200B
External DC Bias Adapter 

External DC Bias Adapter

16200B
The 16200B test fixture allows you to supply a bias current across the device of up to 5Adc through a 7mm port by using an external dc current source.
16334A
Test Fixture (Tweezers Contacts) 

Test Fixture (Tweezers Contacts)

16334A
The 16334A is designed for impedance evaluations of SMD.
16380A
Standard Air Capacitor Set (1pF to 1000pF) 

Standard Air Capacitor Set (1pF to 1000pF)

16380A
The 16380A is a standard capacitor set consisting of four precision capacitors
16380C
Capacitance Standard Set - 0.01uF to 10uF 

Capacitance Standard Set - 0.01uF to 10uF

16380C
The 16380C is a standard capacitor set consisting of three precision capacitors - 0.01uF (16385A), 0.1uF (16386A), 1uF (16387A),and an optional 10uF (16338A).
16451B
Dielectric Test Fixture 

Dielectric Test Fixture

16451B
The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150.
42030A
Four Terminal Pair Standard Resistor Set 

Four Terminal Pair Standard Resistor Set

42030A
The 42030A is a st
42090A
Open Termination (4-Terminal Pair) 

Open Termination (4-Terminal Pair)

42090A
The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.
42091A
Short Termination (4-Terminal Pair) 

Short Termination (4-Terminal Pair)

42091A
The 42091A is a short termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.