AWG5200

AWG5200 임의 파형 발생기는 저렴한 가격으로 다중 장치 동기화를 통해 최대 32개 이상의 채널로 확장할 수 있으며, 높은 신호 충실도를 통해 까다로운 신호 발생이 가능합니다. 고급 연구, 전자 테스트 및 레이더, 전자전 시스템 설계 및 테스트에서 이상적입니다.



 

모델	아날로그 채널	수직 해상도	아날로그 대역폭	출력 주파수	최대 샘플 속도	정가
AWG5202	2	16비트	2GHz(-3dB x)	DC 출력: 디퍼런셜1.5Vp-p /// AC 출력: -17 ~ -5dBm 싱글 엔드, BW 10MHz ~ 2GHz(기본) /// Amp AC 출력: -85 ~ +10dBm 싱글 엔드, BW 10MHz ~ 2GHz(옵션)	1.5KS/s ~ 10GS/s(4GHz)
AWG5204	4	16비트	2GHz(-3dB x)	DC 출력: 디퍼런셜1.5Vp-p /// AC 출력: -17 ~ -5dBm 싱글 엔드, BW 10MHz ~ 2GHz(기본) /// Amp AC 출력: -85 ~ +10dBm 싱글 엔드, BW 10MHz ~ 2GHz(옵션)	1.5KS/s ~ 10GS/s(4GHz)
AWG5208	8	16비트	2GHz(-3dB x)	DC 출력: 디퍼런셜1.5Vp-p /// AC 출력: -17 ~ -5dBm 싱글 엔드, BW 10MHz ~ 2GHz(기본) /// Amp AC 출력: -85 ~ +10dBm 싱글 엔드, BW 10MHz ~ 2GHz(옵션)	1.5KS/s ~ 10GS/s(4GHz)

Specifications

All specifications are typical unless noted otherwise. All specifications apply to all models unless noted otherwise.

Hardware characteristics

Number of analog outputs

AWG5202

2 

AWG5204

4 

AWG5208

8 

Analog output connector type

SMA female

Analog output impedance

50 Ω

Number of marker outputs

AWG5202

8 

AWG5204

16 

AWG5208

32 

Resolution (nominal)

16 bits with no markers active, 15 bits with 1 marker active, 14 bits with 2 markers active, 13 bits with 3 markers active, 12 bits with 4 markers active

Waveform memory

2 GS/channel

Waveform granularity

1 sample

Waveform minimum size

2400 samples

Run modes

Continuous

Waveform is continuously repeated

Triggered

Waveform is output only once after a trigger is received

Triggered Continuous

Waveform is continuously repeated after a trigger is received

Gated

Waveform is continuously repeated while the trigger is enabled

Sample rate (nominal)

300 S/s to 5 GS/s (10 GS/s Interpolated - Double Data Rate)

Sin(x)/x (-3dB)

2.22 GHz @ 5 GS/s, 4.44 GHz Interpolated @ 10 GS/s

Computer characteristics

Operating system / peripherals / IO

Microsoft® Windows OS

USB 2.0 compliant ports (2 front)

USB 3.0 compliant ports (4 rear)

RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T

VGA video (rear panel) for external monitor

eSATA (rear panel)

Display characteristics

LED backlit touch screen display, 165 mm (6.5 in.) diagonal, 1024 × 768 XGA

Software driver for third-party applications

IVI-COM driver

IVI-C driver

Analog output characteristics

Effective frequency output

Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR / 2.5".

 

2 GHz

4 GHz (Double Data Rate - DDR mode)

DC High Bandwidth output

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

25 mVp-pto 0.75 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 1.5 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into DC voltage terminated

Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth

At 750 mVp-p: DC to 2 GHz (3 dB), DC to 4 GHz (6 dB)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 110 ps at 1.5 Vp-psingle-ended termination

DC High Bandwidth Amplified output (option)

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

25 mVp-pto 1.5 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 3.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into DC voltage terminated

Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth

At 750 mVp-p: DC to 2 GHz (3 dB), DC to 4 GHz (6 dB)

At 1.5 Vp-p: DC to 1.3 GHz (3 dB)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 180 ps at 1.5 Vp-psingle-ended

DC High Voltage output

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

10 mVp-pto 5.0 Vp-p(single ended, 50 Ω terminated)

20 mVp-pto 10.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of amplitude ≥ 160 mVp-p

±5% of amplitude < 160 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into high resistance or matching voltage terminated

Offset accuracy

±(2% of |offset| + 1% of amplitude + 20 mV). (50 Ω-to-Gnd) (Common mode guaranteed.)

± 88 mV; into 100 Ω. (Differential mode.)

Analog bandwidth

DC – 370 MHz (3 dB) (at 2 Vp-p)

DC – 200 MHz (3 dB) (at 4 Vp-p)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 1.3 ns, at 5 Vp-psingle-ended.

< 1.1 ns, at 4 Vp-psingle-ended.

< 0.8 ns, at 3 Vp-psingle-ended.

< 0.6 ns, at 2 Vp-psingle-ended.

AC Direct output

Amplitude levels are measured as singled-ended outputs.

Amplitude range

-17 dBm to -5 dBm

Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias

±5 V at 150 mA

DC bias accuracy (guaranteed)

±(2% of bias + 20 mV); into an open circuit (zero load current)

Analog bandwidth

10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)

AC Amplified output (option)

Amplitude levels are measured as singled-ended outputs.

Amplitude range

-85 dBm to +10 dBm (10 MHz to 3.5 GHz)

-50 dBm to +10 dBm (>3.5 GHz to 5 GHz)

Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias

±5 V at 150 mA

DC bias accuracy (guaranteed)

±(2% of bias + 20 mV); into an open circuit (zero load current)

Analog bandwidth

10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)

Output match VSWR

 

Output path	Specification
DC High Bandwidth (including DCHB Amplified option)	DC to 1 GHz < 1.25:1  1 GHz to 3 GHz < 1.9:1  3 GHz to 4 GHz < 2.3:1
DC High Voltage	DC to 400 MHz < 1.6:1  400 MHz to 1 GHz < 1.75:1  1 GHz to 2 GHz < 2.3:1
AC Direct	10 MHz to 300 MHz < 2.0:1  300 MHz to 1.4 GHz < 1.6:1  1.4 GHz to 3 GHz < 2.2:1  3 GHz to 4 GHz < 2.5:1
AC Amplified, +3 dBm	10 MHz to 500 MHz < 2.4:1  500 MHz to 1.5 GHz < 1.75:1  1.5 GHz to 4 GHz < 1.9:1

Bit rate

Bit rate determined as "sample rate / 4 points per cycle", allowing full impairment generation.

1.25 Gb/s at 5 GS/s

Channel timing characteristics

Channel to channel skew (DC high bandwidth mode only)

±25 ps

Skew adjust

Range

±2 ns

Resolution

250 fs

Sequencer characteristics

Maximum sequencing steps

16,384 

Sub sequencing

Single level of depth

Spurious Free Dynamic Range (SFDR) characteristics

Effective number of bits (ENOB)

SFDR characteristics

SFDR is determined as a function of the directly generated carrier frequency.

Harmonics not included. Measured with a balun and with output amplitude set to 500 mV.

DC High Bandwidth

500 mVpp

2.5 GS/s		In band performance		Adjacent band performance
	Analog channel output frequency	Measured across	Specification	Measured across	Specification
	100 MHz	10 to <1250 MHz	–80 dBc	–	–
	10 to <155 MHz	10 to <1250 MHz	–80 dBc	–	–
	155 to <1000 MHz	10 to <1000 MHz	–53 dBc	1000 to <1250 MHz	–60 dBc
	1000 to <1250 MHz	1000 to <1250 MHz	–50 dBc	10 to <1000 MHz	–50 dBc

 

5 GS/s		In band performance		Adjacent band performance
	Analog channel output frequency	Measured across	Specification	Measured across	Specification
	100 MHz	10 to <1250 MHz	–80 dBc	1250 to <2500 MHz	–75 dBc
	10 to <310 MHz	10 to <1250 MHz	–80 dBc	1250 to <2500 MHz	–70 dBc
	310 to <1250 MHz	10 to <1250 MHz	–67 dBc	1250 to <2500 MHz	–64 dBc

Specifications

All specifications are typical unless noted otherwise. All specifications apply to all models unless noted otherwise.

Hardware characteristics

Number of analog outputs

AWG5202

2 

AWG5204

4 

AWG5208

8 

Analog output connector type

SMA female

Analog output impedance

50 Ω

Number of marker outputs

AWG5202

8 

AWG5204

16 

AWG5208

32 

Resolution (nominal)

16 bits with no markers active, 15 bits with 1 marker active, 14 bits with 2 markers active, 13 bits with 3 markers active, 12 bits with 4 markers active

Waveform memory

2 GS/channel

Waveform granularity

1 sample

Waveform minimum size

2400 samples

Run modes

Continuous

Waveform is continuously repeated

Triggered

Waveform is output only once after a trigger is received

Triggered Continuous

Waveform is continuously repeated after a trigger is received

Gated

Waveform is continuously repeated while the trigger is enabled

Sample rate (nominal)

300 S/s to 5 GS/s (10 GS/s Interpolated - Double Data Rate)

Sin(x)/x (-3dB)

2.22 GHz @ 5 GS/s, 4.44 GHz Interpolated @ 10 GS/s

Computer characteristics

Operating system / peripherals / IO

Microsoft® Windows OS

USB 2.0 compliant ports (2 front)

USB 3.0 compliant ports (4 rear)

RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T

VGA video (rear panel) for external monitor

eSATA (rear panel)

Display characteristics

LED backlit touch screen display, 165 mm (6.5 in.) diagonal, 1024 × 768 XGA

Software driver for third-party applications

IVI-COM driver

IVI-C driver

Analog output characteristics

Effective frequency output

Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR / 2.5".

 

2 GHz

4 GHz (Double Data Rate - DDR mode)

DC High Bandwidth output

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

25 mVp-pto 0.75 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 1.5 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into DC voltage terminated

Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth

At 750 mVp-p: DC to 2 GHz (3 dB), DC to 4 GHz (6 dB)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 110 ps at 1.5 Vp-psingle-ended termination

DC High Bandwidth Amplified output (option)

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

25 mVp-pto 1.5 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 3.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into DC voltage terminated

Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth

At 750 mVp-p: DC to 2 GHz (3 dB), DC to 4 GHz (6 dB)

At 1.5 Vp-p: DC to 1.3 GHz (3 dB)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 180 ps at 1.5 Vp-psingle-ended

DC High Voltage output

Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.

Amplitude range

10 mVp-pto 5.0 Vp-p(single ended, 50 Ω terminated)

20 mVp-pto 10.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of amplitude ≥ 160 mVp-p

±5% of amplitude < 160 mVp-p

Offset

±2 V (50 Ω into gnd), ±4 V into high resistance or matching voltage terminated

Offset accuracy

±(2% of |offset| + 1% of amplitude + 20 mV). (50 Ω-to-Gnd) (Common mode guaranteed.)

± 88 mV; into 100 Ω. (Differential mode.)

Analog bandwidth

DC – 370 MHz (3 dB) (at 2 Vp-p)

DC – 200 MHz (3 dB) (at 4 Vp-p)

Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 1.3 ns, at 5 Vp-psingle-ended.

< 1.1 ns, at 4 Vp-psingle-ended.

< 0.8 ns, at 3 Vp-psingle-ended.

< 0.6 ns, at 2 Vp-psingle-ended.

AC Direct output

Amplitude levels are measured as singled-ended outputs.

Amplitude range

-17 dBm to -5 dBm

Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias

±5 V at 150 mA

DC bias accuracy (guaranteed)

±(2% of bias + 20 mV); into an open circuit (zero load current)

Analog bandwidth

10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)

AC Amplified output (option)

Amplitude levels are measured as singled-ended outputs.

Amplitude range

-85 dBm to +10 dBm (10 MHz to 3.5 GHz)

-50 dBm to +10 dBm (>3.5 GHz to 5 GHz)

Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias

±5 V at 150 mA

DC bias accuracy (guaranteed)

±(2% of bias + 20 mV); into an open circuit (zero load current)

Analog bandwidth

10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)

Output match VSWR

 

Output path	Specification
DC High Bandwidth (including DCHB Amplified option)	DC to 1 GHz < 1.25:1  1 GHz to 3 GHz < 1.9:1  3 GHz to 4 GHz < 2.3:1
DC High Voltage	DC to 400 MHz < 1.6:1  400 MHz to 1 GHz < 1.75:1  1 GHz to 2 GHz < 2.3:1
AC Direct	10 MHz to 300 MHz < 2.0:1  300 MHz to 1.4 GHz < 1.6:1  1.4 GHz to 3 GHz < 2.2:1  3 GHz to 4 GHz < 2.5:1
AC Amplified, +3 dBm	10 MHz to 500 MHz < 2.4:1  500 MHz to 1.5 GHz < 1.75:1  1.5 GHz to 4 GHz < 1.9:1

Bit rate

Bit rate determined as "sample rate / 4 points per cycle", allowing full impairment generation.

1.25 Gb/s at 5 GS/s

Channel timing characteristics

Channel to channel skew (DC high bandwidth mode only)

±25 ps

Skew adjust

Range

±2 ns

Resolution

250 fs

Sequencer characteristics

Maximum sequencing steps

16,384 

Sub sequencing

Single level of depth

Spurious Free Dynamic Range (SFDR) characteristics

Effective number of bits (ENOB)

SFDR characteristics

SFDR is determined as a function of the directly generated carrier frequency.

Harmonics not included. Measured with a balun and with output amplitude set to 500 mV.

DC High Bandwidth

500 mVpp

2.5 GS/s		In band performance		Adjacent band performance
	Analog channel output frequency	Measured across	Specification	Measured across	Specification
	100 MHz	10 to <1250 MHz	–80 dBc	–	–
	10 to <155 MHz	10 to <1250 MHz	–80 dBc	–	–
	155 to <1000 MHz	10 to <1000 MHz	–53 dBc	1000 to <1250 MHz	–60 dBc
	1000 to <1250 MHz	1000 to <1250 MHz	–50 dBc	10 to <1000 MHz	–50 dBc

 

5 GS/s		In band performance		Adjacent band performance
	Analog channel output frequency	Measured across	Specification	Measured across	Specification
	100 MHz	10 to <1250 MHz	–80 dBc	1250 to <2500 MHz	–75 dBc
	10 to <310 MHz	10 to <1250 MHz	–80 dBc	1250 to <2500 MHz	–70 dBc
	310 to <1250 MHz	10 to <1250 MHz	–67 dBc	1250 to <2500 MHz	–64 dBc