TSG4100A 시리즈 벡터신호발생기

TSG4100A 시리즈 RF 벡터 신호 발생기는 중간급 RF 성능과 최대 200MHz의 변조 대역폭을 제공합니다. 편리한 현장 내 소프트웨어 업그레이드를 통해 아날로그에서 고급 벡터 및 디지털 변조 기능으로 장치를 손쉽게 전환할 수 있으므로, 매우 유연한 구성과 최고의 CAPEX 보호를 사용할 수 있습니다.

 

특징	장점
최대 6MHz의 내부 IQ 대역폭	출력 기본 디지털 RF 신호 및 좁은 대역폭 통신 신호.
최대 200MHz의 외부 IQ 대역폭	무선/통신 신호를 위한 매우 넓은 대역폭
소프트웨어를 통해 내부 벡터 변조 소스로 손쉽게 업그레이드	아날로그 및 벡터 신호 발생기 애플리케이션을 모두 매우 저렴한 비용으로 사용할 수 있습니다.
OCXO 시간 기반이	R&D 애플리케이션을 위한 탁월한 수명 및 안정성 성능
출력 주파수 범위가 트루 DC에서 시작합니다.	DC/저주파수 애플리케이션을 위한 기타 장비를 추가할 필요가 없습니다.

 

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Frequency

BNC output, all models

DC to 62.5 MHz

N-type outputs

TSG4102A

950 kHz to 2.0 GHz

TSG4104A

950 kHz to 4.0 GHz

TSG4106A

950 kHz to 6.0 GHz

Frequency resolution

1 μHz at any frequency

Switching speed

<8 ms (to within 1 ppm)

Frequency error

<(10–18 + time-base error) × fc

Frequency stability

1 × 10–11 (1 s Allan variance)

Front panel BNC output

Frequency range

DC to 62.5 MHz

Amplitude

1.00 VRMS to 0.001 VRMS (-47 dBm to +14.96 dBm)

Offset

±1.5 VDC

Offset resolution

5 mV

Maximum excursion

1.817 V (amplitude + offset)

Amplitude resolution

<1 %

Amplitude accuracy

±0.7 dB

Harmonics, typical

<–40 dBc

Spurious, typical

<–65 dBc

Output coupling

DC, 50 Ω ±2%

Impedance

50 Ω

Reverse protection

±5 VDC

VSWR, typical

< 1.6 :1 

Front panel N-type output

Power output

TSG4102A

+16.5 dBm to –110 dBm

TSG4104A

+16.5 dBm to –110 dBm (<3 GHz)

TSG4106A

+16.5 dBm to –110 dBm (<4 GHz)

+10 dBm to –110 dBm (4-6 GHz)

Voltage output

TSG4102A

1.5 VRMS to 0.7VRMS

TSG4104A

1.5 VRMS to 0.7 μVRMS (<3 GHz)

TSG4106A

1.5 VRMS to 0.7 μVRMS (<4 GHz)

Amplitude resolution

0.01 dBm

Amplitude accuracy

CW, 50 Ω load (dB, typical)

CW, 18 °C to 28 °C	>10 dBm	10 to -30 dBm	-30 to -60 dBm	-60 to -100 dBm	<-100 dBm
10 MHz to 0.1 GHz	±0.2	±0.25	±0.35	±0.45	±0.6
0.1 GHz to 2 GHz	±0.15	±0.15	±0.25	±0.35	±0.6
2 GHz to 4 GHz	±0.3	±0.2	±0.35	±0.6	±0.8
4 GHz to 6 GHz	NA	±0.3	±0.4	±0.75	±1.25

 

 

CW, 50 Ω load (dB, max)

Level range:	+5 to -30 dBm (max)		+5 to -30 dBm (typical)
Temperature:	18 °C to 28 °C	5 °C to 40 °C	5 °C to 40 °C
10 MHz to 0.1 GHz	±0.6	±1.0	±0.7
0.1 GHz to 2 GHz	±0.6	±1.0	±0.6
2 GHz to 4 GHz	±0.6	±1.0	±0.7
4 GHz to 6 GHz	±1	±1.5	±0.9

Impedance

50 Ω

Output coupling

AC, 50 Ω

VSWR, typical

<1.5 (2 MHz to 2 GHz)

<1.8 (2 GHz to 6 GHz)

Reverse protection

30 VDC, +25 dBm

IQ modulation output level accuracy

Output amplitude is -5 dBm.

Temperature:	18 °C to 28 °C		5 °C to 40 °C
Fc:	Typical (dB)	Max (dB)	Typical (dB)
<2 GHz	±0.1	±0.4	±0.4
2 GHz to 4 GHz	±0.2	±0.6	±0.4
4 GHz to 6 GHz	±0.4	±0.8	±0.7

Spectral purity of the RF output

Subharmonics

None

Harmonics, maximum

Output level <0 dBm, 1 GHz CW signal

TSG4102A and TSG4104A

< -38 dBc

TSG4106A

< -30 dBc

Harmonics, typical (output level < 0 dBm)

< -35 dBc, CW , Fc < 2 GHz

Spurious (typical)

Output level -10 dBm, CW

< -68 dBc

< -55 dBc

 

Residual FM, typical

1 Hz rms (300 Hz to 3 kHz bandwidth)

Residual AM, typical

0.006 % rms (300 Hz to 3 kHz bandwidth)

SSB phase noise

Output level is +5 dBm at 18 °C to 28 °C.

Carrier							<th class="cellrowb
	1 kHz	10 kHz	20 kHz	1 MHz
1 GHz	-102	-110	-113	-124
2 GHz	-96	-104	-107	-118
3 GHz	-93	-102	-105	-120
6 GHz	-87	-96	-99	-114

SSB phase noise at 1 GHz carrier, maximum (output level +5 dBm, 5 ℃ to 40 ℃)

1 kHz offset

–95 dBc/Hz

10 kHz offset

–106 dBc/Hz

20 kHz offset

–107 dBc/Hz

1 MHz offset

–120 dBc/Hz

2 GHz offset

–118 dBc/Hz

>3 GHz offset

–120 dBc/Hz

Hardware options (All regions except North America)

Options M00 or M01 must be specified at the time of instrument order.

M00

Instrument with oven-controlled crystal oscillator (OCXO)

M01

Instrument with voltage-controlled crystal oscillator (VCXO)

GPIB

Adds GPIB interface

Hardware options (North America only)

Option E1 must be specified at the time of instrument order.

E1

Instrument with oven-controlled crystal oscillator (OCXO) time-base and GPIB interface

Hardware options (All regions)

TSG4100A-RM1

Single rack mount kit (can be ordered separately)

TSG4100A-RM2

Dual rack mount kit (can be ordered separately)

TSG4100A-ATT

30 dB, 5 W RF attenuator up to 6 GHz

D1

A list of performance verification test results

Software options

To upgrade to vector/digital modulation capability and/or add more modulation options after initial purchase, order "TSG4100A-UP + VM xx” instead of “TSG410xA VMxx”.

VM00

Basic vector modulation package with internal 6 MHz modulation bandwidth

VM01

GSM modulation (requires Option VM00)

VM02

GSM EDGE modulation (requires Option VM00)

VM03

W-CDMA modulation (requires Option VM00)

VM04

APCO-25 modulation (requires Option VM00)

VM05

DECT modulation (requires Option VM00)

VM06

NADC modulation (requires Option VM00)

VM07

PDC modulation (requires Option VM00)

VM08

TETRA modulation (requires Option VM00)

VM10

Audio Clip (analog AM and FM)

EIQ

External 200 MHz modulation bandwidth (requires Option VM00)