본문 바로가기 주메뉴 바로가기

MAKER (제조사별 제품보기)

MAKER

DCS 시리즈 (DC전원공급기)

파워 1 kW - 3 kW
전압 8 V - 600 V
전류 1 A - 350 A
사이즈 1U or 2U, 19인치
인터페이스 RS-232(옵션), GPIB(옵션)

DCS 시리즈 개요

1kW, 1.2kW 및 3kW 프로그래밍 가능 전원 공급 장치의 DCS 제품군은 고유 한 패키징 기술을 사용하여 정격 출력 전압 및 전류 제한 내에서 모든 전압 / 암페어 조합으로 연속 전체 출력 전력 (1kW, 1.2kW 또는 3kW)을 달성합니다. 로우 프로파일 섀시. 장기간에 걸쳐 대규모 설치 기반을 시연 한 DCS 제품군은 매우 안정적인 전력 플랫폼을 제공합니다.

이 DCS 전원 공급 장치 제품군에는 동시에 표시되는 전압 및 전류 설정을 조정할 수있는 10 턴 전위차계가있는 사용하기 쉬운 전면 패널이 있습니다. LED는 과열, 원격 프로그래밍, 셧다운 및 과전압 보호, 상태 및 정전압 / 전류 모드 작동을 나타냅니다. DCS 3kW 모델에는 출력 대기 모드, OVP 재설정, 원격 / 로컬 프로그래밍 및 전압, 전류 및 OVP 설정 점의 미리보기 상태에 대한 푸시 버튼 제어 기능이 있습니다.

Sorensen DCS 제품군도 원격으로 제어 할 수 있습니다. 4 개의 아날로그 제어 모드와 격리 된 아날로그 제어 (옵션)가 표준입니다. 컴퓨터 제어는 IEEE488.2 GPIB (옵션) 또는 LXI 호환 이더넷 (옵션)을 통해 수행 할 수 있습니다.



DCS 기능 및 장점

넓은 전압 범위
 0-8 VDC ~ 0-600 VDC; 1.7A ~ 350A의 전류 레벨


액티브 전류 공유를 통한 이스트 마스터 / 슬레이브 병렬


원격 프로그래밍

• 전압, 전류 및 OVP에 대해 선택 가능한 원격 프로그래밍
• LXI 호환 이더넷 LAN / RS-232C (M130)를 통한 16 비트 프로그래밍
• IEEE-488.2 / RS-232C (옵션 M9C)를 통한 12 비트 프로그래밍 절연 아날로그 프로그래밍 (옵션 M51)
멀티 채널 슬레이브 인터페이스 (옵션 M85 또는 M131)

소프트웨어
• M130 옵션 용 IVI-com 드라이버
M9C 옵션 용 Labwindows CVI 드라이버

M9C 옵션 용 LabVIEW 드라이버

  • Specifications +


    Sorensen DCS Series Specifications
    Common
    Meter Accuracy 1% of full scale + 1 count
    Max. Voltage Differential from Output to Safety Ground 150 VDC
    Remote Start/Stop and Interlock TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure
    Cooling Internal fan, over temperature shutdown if internal heat sink exceeds set temperature
    Remote Sense The maximum allowed sense line drop is 4V per line (2V on the DCS 8/10V 1 kW/1.2 kW models
    Remote Programming Enabled via external jumper on rear panel connector J3
    Overvoltage Protection Crowbar type adjustable from 5-110% of rated output using front panel control (local
    Remote Analog Programming Linearity Typical error is less an 0.5% setting.
    Accuracy is 1% of rated output.
    Regulatory Certified to UL/CSA 61010 (Not DCS 3K) and IEC/EN 61010-1 CE Compliant (LVD and EMC directive)
    Input: Voltage and Frequency
    Output Power 200 - 250 VAC 100 - 132 VAC 190 - 250 VAC
    1kW single phase, 8A typical, 47- 63 Hz single phase, 15A typical, 47-63 Hz, internal jumper selectable  
    1.2kW single phase, 9A typical, 47-63 Hz single phase, 18A typical, 47-63 Hz, internal jumper selectable  
    3kW single-phase, 20A, 47- 63Hz.   three phase, 14A, 47-63Hz.
    Output: Voltage and Current
    1kW Model Voltage Current
    DCS 8-125E 0 - 8 0 - 125
    DCS 10-100E 0 - 10 0 - 100
    DCS 20-50E 0 - 20 0 - 50
    DCS 33-33E 0 - 33 0 - 33
    DCS 40-25E 0 - 40 0 - 25
    DCS 50-20E 0 - 50 0 - 20
    DCS 60-18E 0 - 60 0 - 18
    DCS 80-13E 0 - 80 0 - 13
    DCS 100-10E 0 - 100 0 - 10
    DCS 150-7E 0 - 150 0 -7
    DCS 300-3.5E 0 - 300 0 - 3.5
    DCS 600-1.7E 0 - 600 0 - 1.7
    1.2kW Model Voltage Current
    DCS 8-140E 0 - 8 0 - 140
    DCS 10-120E 0 - 10 0 - 120
    DCS 20-60E 0 - 20 0 - 60
    DCS 33-36E 0 - 33 0 - 36
    DCS 40-30E 0 - 40 0 - 30
    DCS 50-24E 0 - 50 0 - 24
    DCS 60-20E 0 - 60 0 - 20
    DCS 80-15E 0 - 80 0 - 15
    DCS 100-12E 0 - 100 0 - 12
    DCS 150-8E 0 - 150 0 - 8
    DCS 300-4E 0 - 300 0 - 4
    3kW Model Voltage Current
    DCS 8-350E 0 - 8 0 - 350
    DCS 12-250E 0 - 12 0 - 250
    DCS 20-150E 0 - 20 0 - 150
    DCS 40-75E 0 - 40 0 - 75
    DCS 55-55E 0 - 55 0 - 55
    DCS 60-50E 0 - 60 0 - 50
    DCS 80-37E 0 - 80 0 - 37
    DCS 150-20E 0 - 150 0 - 20
    Output
    Voltage Resolution 0.02%
    Ripple (mV rms or p-p) See table
    Regulation Line For input voltage variation over the AC input voltage range, with constant rated load.
    Load For 0-100% load variation, with constant nominal line voltage.
    Voltage 0.1%
    Current 0.1%
    Transient Response Typically recovers in 500 μs (1 & 1.2 kW) or 1ms (3k W) to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change.
    Stability ±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
    Efficiency See table below Temperature Coefficient: 0.02%/°C of maximum output voltage; 0.03%/°C of maximum output current. Change in output per °C change in ambient temperature, with constant line and load
    Physical
    Dimensions

    Width: 19” (482 mm) W, Depth 17.52” (445 mm)

    Height: 1 kW and 1.2 kW: 1U or 1.72” (43 mm) 3 kW: 2U or 3.46” (87 mm)

    Weight & Shipping Weight
    Weight 1 kW and 1.2 kW: 19 lbs. ( 8.6 kg)
    3 kW: 33 lbs. (15 kg)
    Shipping Weight 1 kW and 1.2 kW: 24 lbs. (10.9 kg)
    3 kW: 42 lbs. (19 kg)
    Environmental
    Operating Temperature 0°C to 50°C (no derating)
    Storage Temperature -55°C to 85°C
    Humidity Range 0 to 80% RH, non condensing
    Programming Specifications
    DCS Series 1 kW Programming Accuracy M130/M131/M9C/M85 Options
    Voltage 0.1% + Current 0.1% + OVP 0.5% +
    DCS 8-125E 8mV 500mA 44mV
    DCS 10-100E 10mV 400mA 55mV
    DCS 20-50E 20mV 200mA 110mV
    DCS 33-33E 33mV 132mA 182mV
    DCS 40-25E 40mV 100mA 220mV
    DCS 50-20E 50mV 80mA 275mV
    DCS 60-18E 60mV 72mA 330mV
    DCS 80-13E 80mV 52mA 440mV
    DCS 100-10E 100mV 40mA 550mV
    DCS 150-7E 150mV 20mA 825mV
    DCS 300-3.5E 300mV 15mA 1650mV
    DCS 600-1.7E 600mV 6.8mA 3300mV
    DCS Series 1.2 kW Programming Accuracy M130/M131/M9C/M85 Options
    Voltage 0.1% + Current 0.1% + OVP 0.5% +
    DCS 8-140E 8mV 560mA 44mV
    DCS 10-120E 10mV 480mA 55mV
    DCS 20-60E 20mV 240mA 110mV
    DCS 33-36E 23mV 144mA 182mV
    DCS 40-30E 40mV 120mA 220mV
    DCS 50-24E 50mV 96mA 275mV
    DCS 60-20E 60mV 80mA 330mV
    DCS 80-15E 80mV 60mA 440mV
    DCS 100-12E 100mV 48mA 550mV
    DCS 150-8E 150mV 32mA 825mV
    DCS 300-4E 300mV 16mA 1650mV
    DCS Series 3 kW Programming Accuracy M130/M131/M9C/M85 Options
    Voltage 0.1% + Current 0.1% + OVP 0.5% +
    DCS 8-350E 8mV 1400mA 44mV
    DCS 12-250E 12mV 1000mA 66mV
    DCS 20-150E 20mV 600mA 110mV
    DCS 40-75E 40mV 300mA 220mV
    DCS 55-55E 55mV 220mA 303mV
    DCS 60-50E 60mV 200mA 330mV
    DCS 80-37E 80mV 148mA 440mV
    DCS 150-20E 150mV 80mA 825mV
    Read-back Specifications
    DCS Series 1 kW Readback Accuracy
    Voltage 0.1% + Current 0.1% +
    DCS 8-125E 12mV 500mA
    DCS 10-100E 15mV 400mA
    DCS 20-50E 30mV 200mA
    DCS 33-33E 50mV 132mA
    DCS 40-25E 60mV 100mA
    DCS 50-20E 75mV 80mA
    DCS 60-18E 90mV 72mA
    DCS 80-13E 120mV 52mA
    DCS 100-10E 150mV 40mA
    DCS 150-7E 225mV 28mA
    DCS 300-3.5E 450mV 14mA
    DCS 600-1.7E 900mV 7mA
    DCS Series 1.2 kW Readback Accuracy
    Voltage 0.1% + Current 0.1% +
    DCS 8-140E 12mV 560mA
    DCS 10-120E 15mV 480mA
    DCS 20-60E 30mV 240mA
    DCS 33-36E 50mV 144mA
    DCS 40-30E 60mV 120mA
    DCS 50-24E 75mV 95mA
    DCS 60-20E 90mV 80mA
    DCS 80-15E 120mV 60mA
    DCS 100-12E 150mV 48mA
    DCS 150-8E 225mV 32mA
    DCS 300-4E 450mV 16mA
    DCS Series 3 kW Readback Accuracy
    Voltage 0.1% + Current 0.1% +
    DCS 8-350E 12mV 1400mA
    DCS 12-250E 18mV 1000mA
    DCS 20-150E 30mV 600mA
    DCS 40-75E 60mV 300mA
    DCS 55-55E 83mV 220mA
    DCS 60-50E 90mV 200mA
    DCS 80-37E 120mV 148mA
    DCS 150-20E 225mV 80mA
    Output
    DCS Series 1 kW Output Power
    Voltage VDC Current ADC @ 50°C
    DCS 8-125E 0-8 0-125
    DCS 10-100E 0-10 0-100
    DCS 20-50E 0-20 0-50
    DCS 33-33E 0-33 0-33
    DCS 40-25E 0-40 0-25
    DCS 50-20E 0-50 0-20
    DCS 60-18E 0-60 0-18
    DCS 80-13E 0-80 0-13
    DCS 100-10E 0-100 0-10
    DCS 150-7E 0-150 0-7
    DCS 300-3.5E 0-300 0-3.5
    DCS 600-1.7E 0-600 0-1.7
    DCS Series 1.2 kW Output Power
    Voltage VDC Current ADC @ 50°C
    DCS 8-140E 0-8 0-140
    DCS 10-120E 0-10 0-120
    DCS 20-60E 0-20 0-60
    DCS 33-36E 0-33 0-36
    DCS 40-30E 0-40 0-30
    DCS 50-24E 0-50 0-24
    DCS 60-20E 0-60 0-20
    DCS 80-15E 0-80 0-15
    DCS 100-12E 0-100 0-12
    DCS 150-8E 0-150 0-8
    DCS 300-4E 0-300 0-4
    DCS Series 3 kW Output Power
    Voltage VDC Current ADC @ 50°C
    DCS 8-350E 0-8 0-350
    DCS 12-250E 0-12 0-250
    DCS 20-150E 0-20 0-150
    DCS 40-75E 0-40 0-75
    DCS 55-55E 0-55 0-55
    DCS 60-50E 0-60 0-50
    DCS 80-37E 0-80 0-37
    DCS 150-20E 0-150 0-20
    Output
    DCS Series 1 kW Constant Voltage Mode
    Ripple (rms) mV Noise** (p-p) mV Transient Response
    time μs (typ)
    DCS 8-125E 4 60 500
    DCS 10-100E 4 60 500
    DCS 20-50E 4 60 500
    DCS 33-33E 4 60 500
    DCS 40-25E 4 60 500
    DCS 50-20E 4 60 500
    DCS 60-18E 4 60 500
    DCS 80-13E 4 60 500
    DCS 100-10E 4 60 500
    DCS 150-7E 12 160 500
    DCS 300-3.5E 20 200 500
    DCS 600-1.7E 50 300 500
    DCS Series 1.2 kW Constant Voltage Mode
    Ripple (rms) mV Noise** (p-p) mV Transient Response
    time μs (typ)
    DCS 8-140E 5 60 500
    DCS 10-120E 5 60 500
    DCS 20-60E 5 60 500
    DCS 33-36E 5 60 500
    DCS 40-30E 5 60 500
    DCS 50-24E 5 60 500
    DCS 60-20E 5 60 500
    DCS 80-15E 5 60 500
    DCS 100-12E 10 60 500
    DCS 150-8E 15 160 500
    DCS 300-4E 25 200 500
    DCS Series 3 kW Constant Voltage Mode
    Ripple (rms) mV Noise** (p-p) mV Transient Response
    time μs (typ)
    DCS 8-350E 15 100 1000
    DCS 12-250E 10 100 1000
    DCS 20-150E 10 100 1000
    DCS 40-75E 20 100 1000
    DCS 55-55E 20 100 1000
    DCS 60-50E 20 100 1000
    DCS 80-37E 20 100 1000
    DCS 150-20E 30 200 1000
    ** Typical P-P noise and ripple (20Hz to 20MHz)
    Output
    DCS Series 1 kW Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift
    % Vmax (typ)
    DCS 8-125E 0.2 0.02 0.05
    DCS 10-100E 0.2 0.02 0.05
    DCS 20-50E 0.2 0.02 0.05
    DCS 33-33E 0.2 0.02 0.05
    DCS 40-25E 0.2 0.02 0.05
    DCS 50-20E 0.2 0.02 0.05
    DCS 60-18E 0.2 0.02 0.05
    DCS 80-13E 0.2 0.02 0.05
    DCS 100-10E 0.2 0.02 0.05
    DCS 150-7E 0.2 0.02 0.05
    DCS 300-3.5E 0.2 0.02 0.05
    DCS 600-1.7E 0.2 0.02 0.05
    DCS Series 1.2 kW
    Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift
    % Vmax (typ)
    DCS 8-140E 0.2 0.02 0.05
    DCS 10-120E 0.2 0.02 0.05
    DCS 20-60E 0.2 0.02 0.05
    DCS 33-36E 0.2 0.02 0.05
    DCS 40-30E 0.2 0.02 0.05
    DCS 50-24E 0.2 0.02 0.05
    DCS 60-20E 0.2 0.02 0.05
    DCS 80-15E 0.2 0.02 0.05
    DCS 100-12E 0.2 0.02 0.05
    DCS 150-8E 0.2 0.02 0.05
    DCS 300-4E 0.2 0.02 0.05
    DCS Series 3 kW
    Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift
    % Vmax (typ)
    DCS 8-350E 0.2 0.02 0.05
    DCS 12-250E 0.2 0.02 0.05
    DCS 20-150E 0.2 0.02 0.05
    DCS 40-75E 0.2 0.02 0.05
    DCS 55-55E 0.2 0.02 0.05
    DCS 60-50E 0.2 0.02 0.05
    DCS 80-37E 0.2 0.02 0.05
    DCS 150-20E 0.2 0.02 0.05
    Output
    DCS Series 1 kW Programming Constraints Voltage Mode
    Ohms / V

    V / V

    DCS 8-125E 625 0-10V = 0-100% V, or 0-5V = 0-100% V
    DCS 10-100E 500
    DCS 20-50E 250
    DCS 33-33E 151.5
    DCS 40-25E 125
    DCS 50-20E 100
    DCS 60-18E 83
    DCS 80-13E 62.5
    DCS 100-10E 50
    DCS 150-7E 33.3
    DCS 300-3.5E 16.67
    DCS 600-1.7E 8.33

    DCS : Model Number Description

     

     

    Options 

    DCS Series 1.2 kW