본문 바로가기 주메뉴 바로가기

MAKER (제조사별 제품보기)

MAKER

43100 (LCR미터)

주파수 범위 20 Hz to 1 MHz
측정 파라미터 L, C, R, Q, G, X, B, D, Z, Y, Ө
정확도 0.1 %
DCR 측정 0.1 mΩ to > 100 MΩ (옵션)
인터페이스 RS232, USB, LAN, GPIB

4300 시리즈 LCR미터 사양

  4310 4320 4350 43100
Frequency Range 20 Hz to 100 kHz 20 Hz to 200 kHz 20 Hz to 500 kHz 20 Hz to 1 MHz
Frequency Steps 5 Hz     - 20 Hz to 1 kHz
50 Hz   - 1 kHz to 10 kHz
500 Hz - 10 kHz to 100 kHz
5 kHz   - 100 kHz to 1 MHz
Measurement Function Any of the following parameters can be measured and displayed:
Impedance (Z)             Phase Angle (Ө)
Capacitance (C)           Dissipation Factor (D)
Inductance (L)             Quality Factor (Q)
AC Resistance (Rac)   Reactance (X)
Susceptance (B)          Conductance (G)
Admittance (Y)

DC Resistance (Rdc) is an option (/R) on all models.
Measurement Function -
DC Resistance (Rdc)
option (/R)
Series/parallel equivalent circuit Any combination
Polar Form Z + Ө, Y + Ө
Drive Level
(AC measurements)
Open circuit:                     10 mV to 2V rms
Voltage step size:              10 mV (200 steps)
Short circuit:                      100 µA to 20 mA rms
Current step size:              100 µA (200 steps)
Signal source impedance:   100Ω
DC Bias Voltage Internal - 2 Vdc
External - up to ±40V may be connected via rear panel
 
Measurement Ranges Z, R, X          0.01 mΩ to > 1 GΩ
Y, B, G          0.1 nS to > 2 kS
L                    1 nH to > 2 kH
C                    0.01 pF to > 1 F
D, Q               0.0001 to 9999.9
Phase Angle -180° to +180°
Rdc                0.1 mΩ to > 100 MΩ
Basic Accuracy 0.1% varies with speed, frequency, AC drive level and impedance of device under test
Binning (Optional) User programmable PASS and FAIL bins. 25 way D-type interface connector.
Option /B1 (non-isolated) - Common 0V. Bin outputs 0 to 5V (nominal) with >10 mA current sink capability.
Option /B2 (isolated) - Common 24V input. Outputs 0 to 24V with >10 mA current source capability.